Transmission Chains

Transmission Chains

Roller Chains for Power Transmission

A roller chain transmits power from a motor to a driven shaft through sprockets, without slip and at a fixed ratio. As a transmission chain it is found on gearbox outputs, packaging and food machinery, conveyor lines, agricultural machines and motorcycles. From Kahramankazan, Ankara, Zincir Gross supplies European (B) and American (A) series industrial roller chain as well as versions adapted to special tasks.

DIN8187 B Series ↗

DIN8187 B Series

DIN 8187 B Series transmission chains are roller chains manufactured to European dimensional standards that ensure the safe transmission of mechanical power.

DIN8188 ASA Series ↗

DIN8188 ASA Series

DIN 8188 ASA Series transmission chains are roller chains manufactured to American dimensional standards. Offering high strength, reliable power transmission and a long service life, these chains are

Stainless Steel Chains ↗

Stainless Steel Chains

Stainless steel chains are chain types that offer high resistance to moisture, water, chemicals and corrosion. They are used for reliable power transmission and conveying in food, pharmaceutical, chem

Extended Pin Chains ↗

Extended Pin Chains

Extended pin chains are special transmission and conveyor chains that feature outwardly extended pins in addition to the standard chain structure. These extended pins allow carriers, attachments, plat

Attachment Chains ↗

Attachment Chains

Attachment chains are chain types used for conveying, guiding and holding products, thanks to special attachments added to the chain links.

Hollow Pin Chains ↗

Hollow Pin Chains

Hollow pin chains feature special connection holes in the chain pins, allowing carrier equipment, fixtures and add-on parts to be mounted easily.

Agricultural Chains ↗

Agricultural Chains

Agricultural chains are durable chain types used for power transmission and crop conveying in combine harvesters, balers, feed mixers, seed drills and other agricultural equipment.

Double Pitch Chains ↗

Double Pitch Chains

Motorcycle Chains ↗

Motorcycle Chains

Motorcycle chains are essential drive components that transmit engine power to the rear wheel, ensuring smooth and efficient power delivery.

Combine Harvester Chains ↗

Combine Harvester Chains

Combine harvester chains are special chain types that convey the crop through the machine during harvesting and transmit mechanical motion to the relevant sections.

Straight Side Plate Chains ↗

Straight Side Plate Chains

Straight side plate chains are chain types whose wide, flat link plates allow products to be conveyed in a stable and secure manner.

Rubber Top Chains ↗

Rubber Top Chains

Rubber top chains are specially coated chain types that prevent products from slipping, getting scratched or being damaged during conveying.

U-Bracket Attachment Chains ↗

U-Bracket Attachment Chains

U-bracket attachment chains are special chain types used for conveying, guiding and holding products by means of U-shaped attachments mounted on the chain.

Side Flex Chains ↗

Side Flex Chains

Side flex chains are special chain types used in conveyor systems that include horizontal turns and curved paths in addition to straight sections.

Roller chain types: DIN 8187, ANSI and stainless

The table below lists our transmission chain product groups with the relevant standard or series, the size range and the typical application. Click a product name for the detailed dimension tables.

Product Standard / series Size / pitch range Key feature / typical use
DIN8187 B Series DIN 8187 / ISO 606 B (European) 04B–72B; pitch 6.00–114.30 mm Simplex, duplex, triplex; general machine drives
DIN8188 ASA Series DIN 8188 / ANSI (ASA) A (American) 04C/ANSI 25–48A/ANSI 240; pitch 6.35–76.20 mm Simplex to triplex plus heavy (H) series; simplex breaking load 3.2–510.3 kN
Stainless Steel Chains A and B series (e.g. 25SS, 40SS, 08BSS) Standard A/B dimensions Wet, food and corrosive environments; stainless hollow pin and double pitch types
Double Pitch Chains A and B series (e.g. 208A/ANSI 2040, 208B) 208A/208B: pitch 25.40 mm Standard and large roller (C type); long, lightly loaded conveyors
Extended Pin Chains B series 06B–16B Extended pin on every pitch or every 2nd pitch; pushing and carrying products
Hollow Pin Chains B (08BHP–16BHP), A (40HP–80HP), double pitch (C2040HP…) 08B–16B / ANSI 40–80 Rods or fixtures fit through the hollow pin; type A fixed bush, type B roller
Attachment Chains Standard ISO attachments 06B–24B 90° bent attachment, 1 or 2 holes, one or both sides
U-Bracket Attachment Chains B series 08B-U1 … 24B-U1 U-shaped brackets; part carriers and nests
Rubber Top Chains B series 08B-G1 … 24B-G1 Rubber block top; moving delicate parts without slipping
Straight Side Plate Chains Roller chain See product page Straight-edged plates; lines where plates slide on a guide rail
Side Flex Chains ANSI 40SB–80SB, ISO 08BSB–16BSB With minimum side bow radius Curved conveyor and routing lines
Agricultural Chains S type (S-32…S-62), CA type (C-550, C-620) S-32, S-42, S-45, S-52, S-55, S-62 Farm machinery; versions with attachments
Combine Harvester Chains Agricultural machine chain See product page Drive and feeder systems of combines
Motorcycle Chains Vehicle chain See product page Rear-wheel drive chain for motorcycles

Technical criteria for selecting a roller chain

  • Pitch: Chain and sprocket must share the same standard and pitch. 08B-1 and 08A-1 both have a 12.70 mm pitch but are not interchangeable: 08B-1 has an inner width of 7.75 mm and a roller diameter of 8.51 mm, 08A-1 has 7.85 mm and 7.95 mm.
  • Strand count: When simplex is not enough, duplex or triplex chain carries more power at the same pitch; the sprocket must match the number of strands.
  • Breaking load: 18.0 kN for 08B-1 and 14.1 kN for 08A-1. Breaking load is not a working load; allow for shock loads, frequent starts and a safety factor.
  • Environment: Choose stainless chain for moisture, washdown and food contact; plan shorter maintenance intervals in dusty or outdoor conditions.
  • Layout and task: Use side bow chain on curved tracks; attachment, extended pin, hollow pin, U-bracket or rubber top chain for carrying and pushing products.
  • Weight and length: On long, lightly loaded conveyors, double pitch chain reduces chain weight and the number of sprocket teeth. For reference, 08B-1 weighs about 0.69 kg/m.
  • Lubrication and maintenance: Regular lubrication reduces wear and elongation. An elongated chain also wears the sprockets, so check chain and sprockets together.

Standards and how to read chain codes

DIN 8187 (European, B series) and DIN 8188 (American, A series) have been withdrawn and replaced by ISO 606, but both names are still widely used in the market.

  • ISO code "08B-1": the first two digits give the pitch in sixteenths of an inch (08 → 12.70 mm), the letter gives the series (B = European, A = American) and the last digit the strand count (-1 simplex, -2 duplex, -3 triplex).
  • ANSI code "40": the leading digit gives the pitch in eighths of an inch (4 → 12.70 mm); ANSI 40 corresponds to ISO 08A. The suffix "H" denotes the heavy series.
  • Double pitch codes: 2040 or 208A is the double pitch (25.40 mm) version of a 40 chain; the prefix "C" denotes the conveyor type.
  • Suffixes: SS stainless, HP hollow pin, SB side bow, U1 U-bracket, G1 rubber block version.

Frequently asked questions

No. Even at the same pitch, roller diameter and inner width differ; the wrong series quickly wears out both sprocket and chain.

Read the code stamped on the side plate or measure pitch, roller diameter and inner width. If in doubt, send us a sample and we will check the dimensions.
Let us help you choose the right transmission chain: send us the chain code, a drawing or a sample and we will reply with a suitable product and price. Request a quote.