Stainless Steel Chains

Stainless Steel Chains

Stainless Steel Chains

A stainless steel roller chain eliminates the corrosion problems of carbon steel chain where moisture, wash-down water, food or mild chemicals are present. Zincir Gross supplies stainless steel chain in ASA (A series) and DIN/ISO B series sizes as part of its Transmission Chains range. Standard dimensions match the carbon steel chain of the same code, and food grade roller chain applications are among the most common uses.

Stainless steel roller chain dimensions (simplex)

Code Pitch P (mm) Inner width B min (mm) Roller dia. D1 max (mm) Pin dia. D max (mm) Breaking load Q min (kN) Weight q (kg/m)
40SS 12.700 7.85 7.95 3.96 9.6 0.63
50SS 15.875 9.40 10.16 5.08 15.2 1.03
60SS 19.050 12.57 11.91 5.94 21.7 1.51
80SS 25.400 15.75 15.88 7.92 38.9 2.62
100SS 31.750 18.90 19.05 9.53 60.0 3.94
06BSS 9.525 5.72 6.35 3.28 6.2 0.41
08BSS 12.700 7.75 8.51 4.45 12.0 0.70
10BSS 15.875 9.65 10.16 5.08 14.5 0.94
12BSS 19.050 11.68 12.07 5.72 18.5 1.16
16BSS 25.400 17.02 15.88 8.28 40.0 2.73
20BSS 31.750 19.56 19.05 10.19 59.0 3.73

The range also includes bush chains 25SS and 35SS, further B series sizes from 04BSS to 32BSS, 120SS and 24BSS. Breaking loads of stainless chains are lower than those of carbon steel chains of the same size, e.g. 12.0 kN for 08BSS against 18.0 kN for a standard 08B-1, so size the drive accordingly.

Other stainless chain types

  • Stainless double pitch chains (C2040SS–C2100HSS) with small or large rollers (C2042SS, C2052SS etc.) for light, long conveyors.
  • Stainless hollow pin chains (40HPSS–80HPSS, 08BHPSS–16BHPSS) for conveyors where rods or carriers pass through the pins.
  • POM (Delrin) roller option on selected hollow pin types.

Applications

  • Food, beverage and bottling lines, bakery and meat processing machines
  • Pharmaceutical, cosmetics and chemical plants
  • Conveyors that are washed down frequently or run outdoors
  • Water treatment and near-marine applications

Selection and ordering notes

To prepare a quotation, please send:

  • Chain code (e.g. 60SS, 12BSS, C2050SS) or measured pitch, inner width and roller diameter
  • Required length or number of links, connection type (connecting link, offset link, endless)
  • Environment: temperature, cleaning agents, food contact, lubrication possibilities
  • Load and speed data; if possible a drawing or a sample of the old chain

For carbon steel equivalents see the DIN8187 B Series and the DIN8188 ASA Series.

Frequently asked questions

Yes. Dimensions are the same as carbon steel chain of the same code; in corrosive environments the sprocket should also be stainless or made from a suitable material.

It can run dry, but a lubricant suited to the environment (food grade if required) reduces wear and extends service life.
Send us your chain code, drawing or sample and request a quote.