DIN8187 B Series
DIN 8187 B Series Transmission Chains
The DIN 8187 roller chain is the B series transmission chain most widely used in Europe and is based on the British standard roller chain. DIN 8187 has since been replaced by ISO 606, and codes such as 08B-1 or 16B-1 are identical under both. Zincir Gross supplies simplex, duplex and triplex B series chains from Kahramankazan, Ankara, as part of its Transmission Chains range.
DIN 8187 / ISO 606 B series chain dimensions (simplex)
| Code (DIN/ISO) | Pitch P (mm) | Inner width B min (mm) | Roller dia. D1 max (mm) | Pin dia. D max (mm) | Pin length L max (mm) | Breaking load Q min (kN) | Weight q (kg/m) |
|---|---|---|---|---|---|---|---|
| 05B-1 | 8.000 | 3.00 | 5.00 | 2.31 | 8.20 | 5.0 | 0.20 |
| 06B-1 | 9.525 | 5.72 | 6.35 | 3.28 | 13.15 | 9.0 | 0.41 |
| 08B-1 | 12.700 | 7.75 | 8.51 | 4.45 | 16.70 | 18.0 | 0.69 |
| 10B-1 | 15.875 | 9.65 | 10.16 | 5.08 | 19.50 | 22.4 | 0.93 |
| 12B-1 | 19.050 | 11.68 | 12.07 | 5.72 | 22.50 | 29.0 | 1.15 |
| 16B-1 | 25.400 | 17.02 | 15.88 | 8.28 | 36.10 | 60.0 | 2.71 |
| 20B-1 | 31.750 | 19.56 | 19.05 | 10.19 | 41.30 | 95.0 | 3.70 |
| 24B-1 | 38.100 | 25.40 | 25.40 | 14.63 | 53.40 | 160.0 | 7.10 |
| 28B-1 | 44.450 | 30.99 | 27.94 | 15.90 | 65.10 | 200.0 | 8.50 |
| 32B-1 | 50.800 | 30.99 | 29.21 | 17.81 | 66.00 | 250.0 | 10.25 |
| 40B-1 | 63.500 | 38.10 | 39.37 | 22.89 | 82.20 | 355.0 | 16.35 |
The series runs from 04B to 72B (pitch 6 mm to 114.3 mm). Duplex and triplex versions raise the breaking load accordingly, e.g. 32.0 kN for 08B-2 and 47.5 kN for 08B-3, or 106.0 kN for 16B-2 and 160.0 kN for 16B-3.
Features and applications
- Heat-treated pins, bushes and rollers; from 16B upwards inner and outer plates have different thicknesses.
- Simplex (-1), duplex (-2) and triplex (-3) versions for higher power transmission at the same pitch.
- Agricultural machinery, conveyor drives, packaging and textile machines, gearbox outputs and general machine building.
- Direct replacement for original chains on European-built equipment.
Selection and ordering notes
B series and A series (ASA/ANSI) chains are not interchangeable, even at the same pitch: inner width and roller diameter differ. For a quotation, please send:
- Chain code (e.g. 10B-1, 12B-2) or measured pitch, inner width and roller diameter
- Number of strands (simplex / duplex / triplex) and required length or number of links
- Connection type: connecting link, offset link or endless (riveted) chain
- Operating conditions: speed, load, environment (moisture, chemicals, temperature)
- If available, a drawing, a sample of the old chain or the matching sprocket data
For American-standard machines see the DIN8188 ASA Series; for wet or food-contact environments, Stainless Steel Chains may be the better choice.