Leaf Chains

Leaf Chains

Leaf Chains for Forklifts and Lifting Equipment

A leaf chain is a lifting chain made only of plates and pins, with no rollers, and it runs over sheaves rather than sprockets. It is used in forklift masts, stackers, lifting tables, counterweight systems and machine tools to lift and balance loads safely. Zincir Gross supplies leaf chains to American and European standards in a range of plate lacings.

AL, BL and LL series leaf chains

The three series differ in standard, pitch and load capacity. Knowing the series of your existing chain is the first step towards choosing the correct replacement. Each series offers several lacings, so different load capacities are available at the same pitch.

Series Standard Reference range Pitch Lacing Breaking load Typical use
AL Series ANSI, light duty AL322 … AL1688 9.525–50.80 mm 2x2, 3x4, 4x4, 6x6, 8x8 9.0–942 kN Light lifting, balancing and machine tool applications
BL Series ANSI, heavy duty (ISO equivalent LH) BL422 / LH0822 upwards 12.70–63.50 mm (larger on request) 2x2, 2x3, 3x4, 4x4, 4x6, 6x6, 8x8 22.2–1,734.8 kN Forklift masts and heavy lifting equipment
LL Series ISO 4347 (European) LL0822 … LL4888 12.70–76.20 mm 2x2, 4x4, 6x6, 8x8 18.2–2,240 kN Stackers and lifting machines of European origin

Technical criteria for selecting a leaf chain

  • Series and pitch: The replacement must match the existing chain in series and pitch. BL644 / LH1244 and LL1244 share a 19.05 mm pitch, but their pin diameters (7.94 mm vs 5.72 mm) and breaking loads (97.9 kN vs 59.0 kN) differ, so they are not interchangeable.
  • Lacing: A higher lacing makes the chain wider and raises the breaking load. The chain must fit the sheave width and the anchor bolt (clevis).
  • Breaking load and safety: The listed value is the minimum breaking load, not a working load. On lifting equipment, follow the safety factor specified by the machine manufacturer.
  • Sheave compatibility: A leaf chain wraps around a sheave, not a sprocket; sheave diameter, width and surface condition directly affect chain life.
  • End fittings: Anchor bolts, pins and retaining parts at the chain ends must match the chain in size and strength.
  • Lubrication and maintenance: Wear between pin and plate causes elongation. Lubricate regularly and inspect for elongation, corrosion and cracked plates at set intervals.
  • Replacement: Replace chains in pairs and renew them once the manufacturer's elongation limit is reached.

How to read leaf chain codes

The last two digits of the code give the lacing: 4x4 means 4 outer x 4 inner plates. The leading digits give the pitch.

  • AL and BL series: the first digit(s) give the pitch in eighths of an inch. In BL644, 6 → 19.05 mm pitch and 44 → 4x4 lacing; in AL322, 3 → 9.525 mm pitch and 22 → 2x2 lacing.
  • LH and LL series: the first two digits give the pitch in sixteenths of an inch. In LH1244 and LL1244, 12 → 19.05 mm pitch; in LL4888, 48 → 76.20 mm pitch and 8x8 lacing.
  • BL and LH are two names for the same chain family, for example BL644 corresponds to LH1244. The LL series is a separate series to ISO 4347.

Frequently asked questions

Read the code on the side plate; if it is illegible, measure pitch, lacing and pin diameter. Forklifts typically use BL/LH or LL series chains.

This is not recommended. Chains on the same mast elongate equally, and replacing only one leads to uneven load sharing. Replace them in pairs.
Let us identify the right leaf chain for your lifting equipment: send us the chain code, a drawing or a sample and we will reply with a suitable product and price. Request a quote.